1997 Tayana 52

Robert Perry has written that the Tayana 52 is one of his favorite designs. Blending a low freeboard with a long waterline and a moderate beam, the Tayana 52 appears to be moving even when it's tied to a dock. Like most Tayana yachts, this ocean-proven greyhound is available in center or aft cockpit configurations. Side decks are wide and deck space is abundant. Typically sailed as a cutter rig, the Tayana 52 is remarkably seakindly for such a powerful hull and sail plan. Tayana 52's have won major offshore races. In many ways it can be said that the Tayana 52 is the kind of yacht that racing sailors choose to cruise.

Specifications

Year Built 1997

Category Sail

Length Overall 52'5 ft

Beam 15'1 ft

Max Draft 6'6 ft

Cabins 3

Electrical System 12v

Double Berths 2

Construction Fiberglass

Hull ID TYA52067K797

Keel Fin Keel

Drive Type Direct

Engines 1

Total Engine Power 110 hp

Fuel Tanks 2

Fuel Tank Cap. 200 gal

Fuel Tank Mat. Steel

Water Tanks 2

Water Tank Cap. 200 gal

Water Tank Mat. Stainless-steel

Dry Weight 38570 lb

Ballast 14800 lb

Displacement 38,570 lb

Windlass Electric

Tax Status Not Applicable

Engine 1 Specifications

Make: YANMAR

Model: Yanmar 4LH-TE S/N 10703

Fuel: Diesel

Engine Power: 110hp

Type: Inboard

Propeller Type: 3 BladeBronze, Feathering

Engine Location: Center

Drive Type: Direct

Year: 1997

Engine Hours: 1,500

Sail Area

IJPE : 1154.00 sq ft

I : 62.00 ft

J : 20.67 ft

P : 57.00 ft

E : 18.00 ft

Working Sail Area : 1156.00 sq ft

Manufacturer Provided Description

CONSTRUCTION

Hand-laminated fiberglass with PVC foam sandwich construction, with net and woven rovings, isophthalic resins. Isophthalic gelcoat on all exterior fiberglass surfaces. A matrix of longitudinal and transverse foam-cored stringers in the lower hull providing maximum hull stiffness. Internal cast iron ballast glassed into a modified fin keel with choice of drafts. Skeg-mounted rudder, with internal stainless steel rudder post and integral stainless steel reinforcement. The deck is of hand lay-up fiberglass construction using end grain light wood sandwich coring. All deck hardware areas are reinforced using encapsulated marine grade plywood. Deck hardware is through-bolted using stainless steel backing plates.

Accommodations

Ascending below from a spacious cockpit you have a double quarter berth to port and to starboard with the galley
fore to port and a head fore to starboard. The main salon has the comfortable and roomy navigation station
opposite the galley with a large dinette immediately forward and directly midship. The settee lies opposite to port.
As you go forward, a large head sits to starboard with a separate shower and the large main cabin encompassing
the area just behind the chain locker.

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Additional Contact Information
EASY TO SHOW IN WAIKIKI !

Specifications

Engine 1 Specifications

Media Gallery